|
|
|
InstructionsAll of our models assemble in the same friendly manner. Every model has instructions and hardware needed to assemble our furniture. No tools are needed to assemble any of our products. Step 1 - Remove wing nuts and washers from the bottom of the posts. Step 2 - Each post is numbered to match up with spot on the base. Place the posts on the base with the metal holders facing each other. Put the bolts on the nuts, but do not tighten them. Leave a little wobble in the posts. Step 4 - Place the tube in between the posts and line up the clips and slide them into the holders on the posts. Work the tube down until it is firmly seated in the holders. Lean the furniture and tighten the wing nuts securely. Step 5 - Place the beds or shelves on top of the posts in the same manner. The metal holders are attached to the posts inside the carpet and the clips on the beds slide down until firmly seated. Step 6 - If your model as a bottom shelf, follow the same directions for installing the tube. Step 7 - If your model has a tunnel, place it on the base. It will rest between the posts.
|
|
|
